Table of Contents
Advertisement
Dynamic radar cruise
control with full-speed
range
Summary of functions
In vehicle-to-vehicle distance
control mode, the vehicle auto-
matically accelerates, deceler-
ates and stops to match the
speed changes of the preceding
vehicle even if the accelerator
pedal is not depressed. In con-
stant speed control mode, the
vehicle runs at a fixed speed.
Use the dynamic radar cruise
control with full-speed range on
freeways and highways.
Vehicle-to-vehicle distance
control mode (P.240)
Constant speed control mode
(P.245)
System Components
Meter display
■
Multi-information display
A
Set speed
B
Indicators
C
MIRAI Owners Manual_USA_M62034_en
5-5. Using the driving support systems
Operation switches
■
Vehicle-to-vehicle distance
A
switch
"+RES" switch
B
Cruise control main switch
C
Cancel switch
D
"-SET" switch
E
WARNING
■
Before using dynamic radar
cruise control with full-speed
range
●
Driving safely is the sole
responsibility of the driver. Do
not rely solely on the system,
and drive safely by always pay-
ing careful attention to your sur-
roundings.
●
The dynamic radar cruise con-
trol with full-speed range pro-
vides driving assistance to
reduce the driver's burden.
However, there are limitations to
the assistance provided.
Read the following conditions
carefully. Do not overly rely on
this system and always drive
carefully.
• When the sensor may not be
correctly detecting the vehicle
ahead: P.247
237
5
Advertisement
Table of Contents
