Alarm Output Setup - A.O. Smith DRE PLUS Installation, User And Service Manual

9.5
0313853_DRE PLUS_ENNLFR_V3.0, 20-06-2023
4. From the Economy mode submenu open the End Normal mode control screen.
5. Change the end time:
a) The [^] indicates which value can be changed.
b) Use [+] to increase the value.
c) Use [-] to decrease the value.
d) Use [>] and [<] to move between hours and minutes.
6. Press [ACCEPT] to confirm the value or press [BACK] to return to the previous
screen.

Alarm output setup

The Alarm output setup submenu shows the output function and the alarm setpoint. The
output function allows you to choose which events trigger the alarm output. These events
are available:
Function
Disabled
Error
Error or warning
Temp < alarm SP
Temp < SP
Heating mode
Alarm output is triggered...
never.
when an error occurs.
when an error or warning occurs.
when the water temperature drops below the alarm setpoint.
when the water temperature drops below the normal set-
point.
when the appliance switches to heating mode.
EN
55