Display Settings; Set The Unit Of Temperature - A.O. Smith DRE PLUS Installation, User And Service Manual

9.6
9.6.1
0313853_DRE PLUS_ENNLFR_V3.0, 20-06-2023
2. Change the alarm temperature setpoint:
a) Use [+] to increase the setpoint.
b) Use [-] to decrease the setpoint.
3. Press [ACCEPT] to confirm the value or press [BACK] to return to the previous
screen.

Display settings

The Display Settings submenu shows the settings for the unit of temperature, the
display brightness, the backlight delay and the language.
Fig. Display settings submenu
Press on a line with a [>] to change the settings.

Set the unit of temperature

To change the unit of temperature:
1. From the Display Settings submenu open the Unit of temperature control screen.
2. Change the setting.
3. Press [ACCEPT] to confirm the value or press [BACK] to return to the previous
screen.
EN
57