Controls And Indicators - Kenwood KR-V7050 Instruction Manual

Controls and indicators
Remote control
light sensor
TUNING
key
STAND BY indicator
Display
Numeric keys
P.CALL key
BAND key
MEMORY key
DIRECT key
VOLUME CONTROL knob
POWER key
AUTO key
with point indicator
VOLUME FONTROL
14 3 +64
ta
ON/STAND BY
SPEAKERS
A
BYPASS key BALANCE
control knob
. DOLBY
PHONES jack PRO LOGIC key LOUDNESS
control knob
DOLBY
3 STEREO key INPUT SELECTOR knob
Tone control knobs
CENTER LEVEL key LINE STRAIGHT key
SPEAKERS A and B keys
REAR LEVEL key
TAPE 2 (MONITOR)
key
DELAY TIME key PRESENCE LEVEL key
DSP LOGIC key
DSP key
SPEAKERS A and B keys
A, B OFF — This position silences all speakers to permit private use of headphones.
AON — Activates speakers connected to the SPEAKERS A terminals on the rear panel.
BON — Activates the speakers connected to the SPEAKERS B terminals on the rear panel.
A,BON — Activates the speakers connected to the SPEAKERS A and B terminals simultaneously.
e If you press the DOLBY PRO LOGIC key, DOLBY 3 STEREO key, DSP LOGIC key or DSP key when both the A and B SPEAKERS
switches are ON, the unit will automatically switch to A so that sound is heard only from the A speakers. Pressing the B key at this
time will switch the sound so that it is heard from the B speakers only.
12 KR-V7050 (En}