System Connections; Connection Of Audio Componentes "0 - Kenwood KR-V7050 Instruction Manual

System connections
Make connections as shown in the diagram below. When connecting the related system components, refer also to
the instruction manuals of the related components.
Do not plug in the power lead until all connections are completed.
—@ Connection of audio components
CD player Tape deck 1 Tape deck 2
Turntable
SPEAKER
IMPEDANCE
SELECTOR
Refer to page 7.
FM DE-EMPHASIS /
CHANNEL SPACE
switch
(Except for some areas.)
System control AC voltage selector switch
jacks (Except for some areas.)
Refer to page 10.
a
CHHSOOS? |. F, | [hecites
nS
DGGE
© © ;
=
REC PLAY REC
PLAY D
iY pay
(Ss
2
Weeatgectaeges
secececececenes
sectctetetetel
SOS
be O50 KKK KSC
ictal Meteteteatatstattetetetetst
RS OO VODOOL?
O y O c b c t 00 Ott te0s 0.0
OD
x>
Mastateeatotetatens
vretatatatetates
POQOOOO?
Speaker system B Center speakers
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.
3. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging / unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
4. Never short-circuit the + and - speaker cords.
5. lf the left and right speakers are connected inversely or if the speaker cords are connected with reversed polarity, the sound becomes
unnatural with ambiguous acoustic image positioning. Be sure to connect the speakers and speaker cords correctly.
6 KR-V7050 (En)