Connection For System Control Operation - Kenwood KR-V7050 Instruction Manual

Audio video stereo receiver
Hide thumbs Also See for KR-V7050:
Table of Contents

Advertisement

System connections
mm Connection for system control operation
Using the system contro! cords provided with KENWOOD system component models, make connections as shown
below.
Turntable
|
To AC outlet
e For
a_
cassette
deck to be subject
to system control
operation, it must
be connected
to
the TAPE 1 jacks.
pong
System control cord
Cassette deck
Operation
oP
5 gyi
=
TT
,
:
'
|
i
DG) y
Q
By connecting this unit to KENWOOD
cassette deck,
——_—___
CD player and turntable models equipped with sys-
tem control jacks, the following integrated operation
CD player
features become available.
System control cord
1. Automatic play operation
When starting play with the turntable, cassette deck, or CD
player connected to the receiver, press the desired input
selector keys on the receiver. The turntable, cassette deck,
or CD player will automatically enter play mode.
in the same way, pressing the Play key of the turntable,
System control connection
cassette deck, or CD player will automatically switch the
input selector on the receiver to the component on which
the Play key is pressed.
. Synchro recording
To record the sound from the CD player or turntable onto a
tape with the cassette deck, press the CD or PHONO of the
input selector keys and load a CD or record. Set the cassette
deck to rec pause mode, then press the Play (start) key of
the CD player or turntable. The cassette deck will start re-
cording automatically, synchronized with the CD player or
turntable starting play.
e
Be sure to insert the system control cord plugs fully
. Remote
control
into the SYSTEM CONTROL terminals.
The remote contro! unit provided with this unit, to which a
e |f the system control cord and audio cords are not con-
KENWOOD
system,
cassette deck, or CD player is con-
nected properly, the automatic system governing re-
nected, is equipped with related control keys. The related
mote control and system functions will not operate.
components can be controlled using these keys.
10 kR-V7050 (En)

Advertisement

Table of Contents
loading

Table of Contents