Kenwood KR-V7050 Instruction Manual page 16

Remote control operation
SURROUND keys
MEMO key
Press to store the current pres-
ence mode in memory.
M1 ~ M4 keys
Press to recall a presence mode
from the memory.
TEST TONE keys
Sets the test tone to ON/OFF
when DOLBY PRO LOGIC or
DOLBY 3 STEREO mode has
been selected.
CENTER MODE key
Press to adjust the center mode
in the Pro Logic, DOLBY 3
STEREO or DSP Logic mode.
16 KR-V7050 (En)
KENWOOD
REMOTE CONTROL UNIT
RC-R0700
VIDEO2 VIDEO 1 TAPE2 TAPE1 TUNER
VOLUME
CONTROL ro
DOLBY PRO LOGIC key
Press to initiate the Dolby Pro
Logic mode.
DOLBY 3 STEREO key
Press to initiate the DOLBY 3
Stereo mode.
DSP LOGIC key
Press to switch the size of the-
ater in the DSP mode (large/
small }.
DSP key
Sets the unit to DSP mode.
Each press of the key switches
the sound field mode.
The keys above are used to
switch the sound field
modes.
BYPASS key
Press to release the presence
modes.
CENTER LEVEL key
Press to adjust the volume of the
center speaker.
REAR LEVEL key
Press to adjust the volume of the
rear speakers.
DELAY TIME key
Press to adjust the delay time.
PRESENCE LEVEL key
Press to adjust the presence ef-
fect level in the DSP/DSP Logic
mode.