Polaris 550 Indy Sport 2024 Owner's Manual page 49

THE PERFECT FIT
THROTTLE BLOCK ALIGNMENT
CAUTION
Take care to avoid damaging hand warmer/brake switch wires when moving
components.
q
1. Slightly loosen the set screw on the bottom of the housing.
2. Move the control block to the desired position.
3. Tighten the screw to specification. Do not over-torque.
TORQUE
Set Screw
35 in-lbs (4 N·m)
4. With the engine off, test throttle lever movement after tightening the screw.
See page 63.
47