Extra - AOC AGON PRO User Manual

Oled monitor
Hide thumbs Also See for AGON PRO:
Table of Contents

Advertisement

Extra

Extra
Input Select
USB
USB Selection
LEA
Orbit
Resolution: 3840(H)x2160(V) SDR
H.Frequency: 135 KHz
V.Frequency: 60 Hz
Exit
Enter
Input Select
USB
USB Selection
LEA
(Prevention
of local image
retention)
Orbit
(Image shift)
Off-RS
(Elimination
of image
retention)
Auto
Off
Auto
Off
Off
Resolution: 3840(H)x2160(V) SDR
H.Frequency: 135 KHz
V.Frequency: 60 Hz
Exit
Select
Auto/ HDMI1/HDMI2 /DP/
USB C* /Miracast/AirPlay/
DLNA
Off/ High Resolution/High
Data Speed
Auto / USB C / USB up
On/ Off
Off / Weak /
Medium /Strong / Strongest
On/ Off
Extra
Off RS
Off
Off Timer
0
Image Ratio
Wide
DDC/CI
Yes
Enter
Select
Select Input Signal Source
For model need to turn on/off USB power during
power saving.
The default USB setting is Off. If you want to
connect USB-C device, please adjust the USB
setting to High Resolution or High Data Speed.
Select the USB upstream data path.
It is used to turn on the LEA function to reduce the
risk of generating image retention. Recommended
function settings: "On."
After this function is enabled, the screen will be
automatically narrowed to fix the brightness of
the display area, so as to reduce possible image
retention.
It is used to turn the Orbit function on to reduce the
risk of generating image retention. Recommended
function setting: "On."
After this function is enabled, image pixels will
circularly move as a whole. The movement
amplitude is based on the settings. The moved
character may be side cut. When "Strongest"
is selected, image retention is most unlikely
generated, but possible side cut may be most
notable.
It is used to enable and run the OFF-RS function
to eliminate image retention which has been
generated.
After startup, select "Yes" according to menu
prompts, and then the display will automatically
shut down the screen. Keep power on, and do not
operate any keys. The power indicator will flash
white (white a second/off a second). This process
lasts for about 10 min. The power indicator turns off
at the end, and the display enters standby state.
32
Extra
Reset
No
Working Time
1.3
Time after Off-RS
1.3
Off-RS Counts
0
JB Counts
0
Resolution: 3840(H)x2160(V) SDR
H.Frequency: 135 KHz
V.Frequency: 60 Hz
Exit
Enter
Select

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ag485ud2

Table of Contents