BMW Z4 ROADSTER Owner's Manual page 236

CONTROLS
Using the button
Functional requirement
When the vehicle is in standby state, the pre-
ventilation can be switched on or off with the
automatic climate control buttons.
Turning on
Press one of the following buttons:
▷ Temperature.
▷ Air conditioning.
▷ Maximum cooling.
▷ AUTO program.
▷ Air recirculation mode.
▷ Upper side of the air flow, manual button.
▷ Air distribution, manual.
▷ Defrosting the windshield
Turning off
Press and hold the bottom button.
The system switches off after leaving and lock-
ing the vehicle.
Via iDrive
Turning on
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Pre-ventilation"
5. "Start now"
Display
Icon Description
Icon on the climate control
display.
Flashing: the pre-ventila-
tion is switched on.
236
Climate control
Online Edition for Part no. 01405A88B63 - VI/23
Departure time
Principle
Different departure times can be set to ensure
a comfortable interior temperature in the vehi-
cle at the time of departure.
▷ One-time departure time: the time can be
set.
The system is switched on once.
▷ Departure time with weekday: time and day
of the week can be set.
On the desired weekdays, the system will
be switched on before the set departure
time.
The departure time is preselected in two steps:
▷ Set departure times.
▷ Activate departure times.
A minimum of 10 minutes should pass be-
tween setting/activating the departure time
and the planned departure time to allow a suf-
ficient period of time for the climate control.
Setting the departure time
Via iDrive
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Pre-ventilation"
5. "Departure plan"
6. Select the desired departure time.
7. Set the departure time.
8. Select day of the week, if needed.
9. "OK"
Activating the departure time
Functional requirement
To switch on the pre-ventilation automatically
at the departure time, the departure time must
be activated first.
OwnersManuals2.com