BMW Z4 ROADSTER Owner's Manual page 227

Button Function
Air recirculation mode.
Air conditioning.
Maximum cooling.
Seat heating, refer to page 116.
Some of the functions can also be used via
voice, e.g., temperature.
Switching climate control functions
on/off
Turning on
Press one of the following buttons:
▷ Temperature.
▷ Air conditioning.
▷ Maximum cooling.
▷ AUTO program.
▷ Air recirculation mode.
▷ Air flow, manual.
▷ Air distribution, manual.
▷ Defrosting the windshield
Turning off
Complete system:
Press the button until the automatic
climate control switches off.
Temperature
Principle
The automatic climate control cools or heats
to the configured temperature and then keeps
the temperature constant.
Online Edition for Part no. 01405A88B63 - VI/23
Climate control
Setting the temperature
Using the button:
Press the upper or lower button side
to set the desired temperature.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Driver"
6. "Temperature:"
7. Set the desired temperature.
Do not rapidly change between different tem-
perature settings. Otherwise, the automatic cli-
mate control will not have sufficient time to ad-
just the set temperature.
Air conditioning
Principle
The air in the interior will be cooled and dehu-
midified and, depending on the temperature
setting, warmed again.
Functional requirement
The interior can only be cooled with the drive-
ready state switched on.
Switch air conditioning on/off
Press the button.
The LED is illuminated when the air
conditioning is switched on.
Depending on the weather, the windshield and
the side windows may fog up briefly when
drive-ready state is switched on.
Air conditioning is switched on automatically
with the AUTO program.
When using the cooling mode, condensation
that will exit below the vehicle.
CONTROLS
227
OwnersManuals2.com