BMW Z4 ROADSTER Owner's Manual page 163

General information
Depending on the equipment, the exterior
lighting of the vehicle can be set individually.
Activating/deactivating welcome
light
1. "CAR"
2. "Settings"
3. "Exterior lighting"
4. Depending on the equipment, select the
following setting:
▷ "Welcome and goodbye"
When unlocking the vehicle, individual
lighting functions are switched on for a
limited time.
Pathway lighting
Principle
For the pathway lighting, the exterior lighting
turns on for a certain period of time after leav-
ing the vehicle in order to illuminate the area
surrounding the vehicle.
Switching pathway lighting on
After switching off the drive-ready state, briefly
push the turn signal lever forward.
Setting the duration
1. "CAR"
2. "Settings"
3. "Exterior lighting"
4. "Pathway lighting"
5. Select the desired setting.
6. "OK"
Online Edition for Part no. 01405A88B63 - VI/23
Lights
Daytime driving lights
General information
The daytime driving lights illuminate when
drive-ready state is switched on.
Activating/deactivating daytime
driving lights
In some countries, daytime driving lights are
mandatory, so it may not be possible to deacti-
vate the daytime driving lights in front.
1. "CAR"
2. "Settings"
3. "Exterior lighting"
4. Depending on the national-market version:
"Daytime driving lights" or "Daytime driving
lights, rear"
Adaptive lighting functions
Principle
Adaptive lighting functions enable dynamic il-
lumination of the road.
General information
The adaptive lighting functions may consist of
one system or multiple systems, depending on
the equipment version:
▷ Cornering light.
Activating
Press the button on the light switch.
The LED in the button illuminates.
The adaptive lighting functions are active
when the drive-ready state is switched on.
CONTROLS
163
OwnersManuals2.com