BMW Z4 ROADSTER Owner's Manual page 232

CONTROLS
Air conditioning is switched on automatically
with the AUTO program.
When using the cooling mode, condensation
that will exit below the vehicle.
Maximum cooling
Principle
The system is set to the lowest temperature,
optimum air flow and recirculated-air mode
with the drive-ready state switched on.
Functional requirement
The function is available at an outside temper-
ature above approx. 32 ℉/0 ℃ and with the
drive-ready state switched on.
Switching maximum cooling on/off
Press the button.
The LED is illuminated when maxi-
mum cooling is switched on.
Air flows out of the air vents to the upper body
area. The air vents need to be open for this.
The air flow can be adjusted with the program
active.
AUTO program
Principle
The AUTO program cools, ventilates or heats
the car's interior automatically.
The air distribution and the temperature are
controlled automatically depending on the in-
terior temperature and the desired tempera-
ture setting including the selected intensity of
the air flow.
Switching the AUTO program on/off
Using the button:
Press the button.
232
Climate control
Online Edition for Part no. 01405A88B63 - VI/23
The LED of the button is illuminated with the
AUTO program switched on.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Driver"
6. "Automatic"
Depending on the selected settings and out-
side influences, the air is directed to the wind-
shield, side windows, upper body, and into the
footwell.
Point the side air vents toward the side win-
dows.
The air conditioning is switched on with the
AUTO program.
At the same time, a condensation sensor con-
trols the program so as to prevent window
condensation as much as possible.
The AUTO program is switched off automati-
cally, when manual air distribution is set.
Adjusting the intensity of the air flow
With the AUTO program switched on, the in-
tensity can be adjusted. This changes the au-
tomatic control for the air mass.
Using the button:
Press the lower or upper side of the
button: decrease or increase intensity.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Driver"
6. "Level"
7. Set the desired intensity.
OwnersManuals2.com