Quick Reference Guide - Uniden EXAI 3248 Series Owner's Manual

EXAI3248.Qx 12/12/2 8:11 PM Page 2
Step 1 Checking the Package Contents
Make sure you have received the following
items in the package. If any of these
items are missing or damaged, contact
the Uniden Parts Department.
•Base unit •Wall mount
•Handset adapter
•AC adapter •Beltclip
•Rechargeable •This Owner's
battery Manual
•Telephone cord •Other Printed
Material
Uniden Parts Department at
(800) 554-3988
Hours: M-F 7:00 a.m. to 5:00 p.m. CST.
We can also be reached on the web at
www.uniden.com
Step 2 Install and Charge the Handset Battery
A
Remove the cover.
Connect the
battery pack
B
connector with
the correct
polarity.
C
Replace the cover.
[ 2 ]
Plug the AC adapter cord into
D
the base unit and then into a
120V AC outlet.
Place the handset on the base
E
and charge continuously for 15-20
hours before using the phone.
Note: Use ONLY the Uniden AC adapter
supplied!
Step 3 Connect to Phone Line
CONNECT TO A PHONE LINE
When the handset battery pack is fully
charged, after 15-20 hours of charging,
plug the telephone cord into the base
unit and then into a telephone wall jack.
Your phone is set for tone dialing. If
your local network requires pulse dialing,
please see "Choosing the dial mode" on
page 15.
Step 4 Setting Display Options
Note: Three Caller ID options are
available: AutoTalk, Caller ID on Call
Waiting (CIDCW), and Area Code.
To set Caller ID, Language and Dialing
Options
A
Press/hold call id/menu key.
Press or keys to move the
B
pointer to an option.
Press select to change the
C
option setting.
D
Press end to exit.
Step 5 Set Answering System
To turn answering
Digital Answerer
system on, press charge/in use
answer on/off.
answer on/off delete
A pre-recorded
greeting will play
find hs memo rec greeting ringer
and your system
clock/menu set
select/volume
mic
is ready to
accept calls.
To record a personal outgoing greeting
to callers, please see page 43.
www.uniden.com