Quick Reference Guide - Uniden EXT 176 SERIES Quick Reference Manual

Step 1 Charging the Battery
TO INSTALL THE HANDSET BATTERY
1
Remove the cover.
Connect the battery pack
2
connector with the
correct polarity.
3
Replace the cover.
TO PLUG INTO AC POWER
Plug AC adapter cord into the base unit
1
and then into a 120V AC outlet. (Use only
the supplied AD-310 AC adapter.)
2
Place the handset in the base.
Note: You must charge the battery continuously for
15 - 20 hours before using the phone.
Step 2 Connecting
CONNECT TO A PHONE LINE
When the handset battery pack is fully charged,
after 15-20 hours of charging, plug the telephone
cord into the base unit and then into a telephone
wall jack.
Your phone is set for tone dialing. If your local
network requires pulse dialing, please see
"Choosing the dialing mode" on page 15.
Step 3 Setting Up the Caller ID/Language
Note: Three Caller ID options are available: AutoTalk,
Caller ID on Call Waiting (CIDCW), and Area Code.
TO CHANGE CALLER ID OPTIONS
1
Press and hold cid/menu.
Press or
2
an option.
3
Press select to change the option setting.
Press end and return the handset to
4
the base.
TO CHOOSE THE LANGUAGE
1
Press and hold cid/menu.
Press or
2
.
Press select to select
3
(French).
Press end and return the handset to
4
the base.
Q U I C K R E F E R E N C E G U I D E
to move the pointer to
to move the pointer to
(English) or
[ 3 ]