Uniden EXAI 3248 Series Owner's Manual page 44

EXAI3248.Qx 12/12/2 8:12 PM Page 42
[ 42 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E
Setting the Message Alert tone
Message Alert feature lets you know you have new messages by sounding a short
beeping tone. If you set the Message Alert to On and when a new message is
received, the alert tone will sound every 15 seconds.
Setting the Message Alert tone to On or Off by using menu key.
1) Press clock/menu five times in standby mode.
You hear the announcement "Message Alert" and the current setting ([
or [ ] On), and it is displayed on the base. And you hear the guidance for
setting.
2) Press select/volume
3) Press set to select the new setting. You hear a confirmation tone, then the
announcement "Message Alert" and the current setting you have selected is
announced. After a few seconds, the system announces "To set language, press
menu again".
When the first new message is received, the beeping tone will begin to sound.
Turning the Message Alert tone Off by pressing any key.
1) To quickly turn Message Alert tone off, press any key on the base unit and the
tone will automatically deactivate. To reset, go back into the menu setup mode
(steps 1 - 3 above.)
Turning Message Alert tone Off when you're away from your phone.
1) When all new messages are played back using the remote playback feature (see
page 50) the Message Alert tone will automatically deactivate. The tone will not
deactivate until all messages are played back.
or key to select.
] Off
www.uniden.com