Roland TR-626 Owner's Manual page 78

Tape Sync
I
e
Tape sync cannot be performed.
Memory Card
I
e
You cannot change the Memory Banks.
e
Data cannot be copied onto a
memory card.
I
MIDI
I
e
The unit cannot receive MIDI messages.
e
The unit receives even the messages
other than the receive channel.
e
Sync cannot be performed.
e
Song Select and Song Position Pointer
cannot be received.
e
Exclusive messages cannot be received.
Others
I
e
The unit is automatically changed
from the Writing to Playing mode.
e
Rhythm does not start playing by
pushing the Start key,
e
Track data is rewritten automatically.
98
0 Connections are not made properly. ( P .95)
OThe output level of the tape recorder is not appropriate.
(P.96)
0 The recording level for sync signals is not appropriate.
(P.94, 96)
0 TAPE SYNC mode is not selected. (P.95, 87)
OYou have failed to push the Start key. (P.95)
OYou have recorded sync signal with the tempo set to
quicker than 180. (P.94)
0 The memory card is not inserted properly. (P.66, 67)
0 The Protect Switch on the memory card is set to ON.
(P.65, 68)
OConnections are not made properly. (P.79, 91)
OThe
OMNI
OFF mode selected and the MIDI receive
channel of the unit is not set to the same number of
the transmit channel of the external unit.(P.79, 80, 83)
OKey numbers of the unit do not match those of the
external unit. (P.80, 84)
00MNI ON is selected. (P.80, 83)
0 MIDI SYNC mode is not selected. (P.85, 87)
0 MIDI SYNC mode is not selected. (P.85, 87)
OYou have performed transmission procedure prior to
reception. (P.91)
OThe basic channels of the transmitter and receiver are not
set to the same one. (P.83, 91)
0 Memory card's Protect Switch is set to ON in Memory
Banks 2 and 3. (P.65)
0 The track is empty. (P.15)
0 EXT SYNC mode is selected. (P.87, 88)
OYou have turn off the unit in the Track Write mode.
OYou have set the memory card's Protect Switch ON or
disconnect the memory card with Memory Banks 2 and
3 set to Track Write mode. (P.65)