Alpine CDA-7832R Service Manual page 63

6. Assy., Motor Sled (M1303) disassembly
(1) Remove two screws (2 (See Figure 6), remove
three Hooks (C) (See Figure 5) and a screw @)
(See Figure 5).
The Assy., Motor Sled (M1303) can be removed.
< Assembly notes >
@ Mount the Assy., Motor Sled (M1303) so the seal
side is correct. (See Figure 6-1)
@ Form the FPC DP-L Control P.C.Borad as shown
in Figure 6-1.
6. €-2-—-Abvy FRA (M1303) ODBAK
(1) 2AD*YO (CMS) CAL. 3HMOIY 7
(C) (5RBRR) c1kOR VQ (5S) &
HALE.
WkEC. E-B2—-—+ Avy KRW (M1303)
AnET.
<M LOHE>
@ £-2-—-Avy FAW (M1303) it. HNO
BIER CRU ACR AU, (6-1 SRR)
@ FPC DP-La> KO-WKRO I-37
6-1 OIC LT FSU,
Tightening torque :
HEA RIL :
Tightening torque : :
@Rt hI :
3.2£0.2kg °
(M1301)
Slider Lock (L)
Assy.,
Bracket Motor
Bracket
Motor-Wire
VIDE-V19008 / DRUCK 1
Tightening torque :
PAT IL:
1.8+0.2kg
<Figure 7 >
7. Assy., Motor-Worm (M1301) disassembly
(1) Remove the spring @ , remove the Lever Disc (L).
(See Figure 3)
(2) Remove three screws @ , remove the Bracket Motor-
Wire. (See Figure 7)
The Assy., Motor-Worm (M1301) with the Slider Lock
(L) and the Assy., Bracket Motor can be removed
completely.
(3) Remove the spring © , remove the Slider Lock (L)
and the Arm Lock (L). (See Figure 8)
(4) Remove two screws 4. (See Figure 8)
The Assy., Motor-Worm (M1301) can be removed.
<Assembly notes >
@ Mount the Assy., Motor-Worm (M1301) so the
seal side is correct. (See Figure 8-1)
@ Form the wires of Assy., Motor-Worm (M1301)
as shown in Figures 8-1 and 8-2.
FPC DP-L Control
P.C.Board
x Seal Side=# A) fl
Assy., Motor Sled
(M1303)
<Figure 6-1 >
cm <6 1Bi> <Figure 6 >
<6&>
Assy., Rivet.
Chassis Base
<7H>
~19-
3) AFUYLABEAL, ZA57TH—-—-Oy7 (L)
er-h-Ay7 (L) EHLET. (BHR)
(4) 2ADAYVOEHLEF. (BHR)
WEG. E-2-—° 94 —LFRiE (M1301) fd
7. €-B2-—+94—L480 (M1301) OD BAR
(2) 3KDRVOEAL. FIT yh+ E-2--*
T4V-€HULEF. (7HBR) ANE Fo
E-2— + 4% —L#A (M1301) We, <#r £ DER >
Ro7H#—-- O47 (L). FIT @ £-2-—-°-94—-—LMW (M1301) (t. HAO
E~R—-PU PHU ERE C-RICANET. MRCERLTRUAI TR Su, (8-1LER)
@ €-2-—°+94-—AM (M1301) O74—
SLUFls, 8-1,8-2HOMICLT FSU,
Assy., Bracket Motor
®
Tightening torque :
RIL:
1.80.2kg.° cm
Assy., Motor-Worm (M1301)
Bracket Motor-Wire
Lever Disc (L)
x Seal Side=i#FN fil
< Figure 8>
<Figure 8-2> <8-2H1>
<8kl>
-20-—