Honda AFP125CRF 2018 Owner's Manual page 85

#
Rear Wheel
AFP125CSF
Removal
1. Support your motorcycle securely and raise
the rear wheel off the ground using the
centre stand or a hoist.
2. Remove the rear brake adjusting nut.
3. Disconnect the brake rod from the brake
arm by pushing down on the rear brake
pedal.
4. Remove the brake arm pin from the brake
arm.
5. Disconnect the brake stopper arm from the
brake panel by removing the cotter pin,
brake stopper arm nut, washer, cushion
rubber.
6. Loosen the drive chain lock nuts and drive
chain adjusting nuts on both sides of the
swingarm.
Tyre Puncture
Drive chain
adjusting nut
Drive chain
lock nut
Brake arm
Rear brake
adjusting nut
Brake stopper
arm nut
7. Remove the rear axle nut while holding the
rear axle shaft at the other rear with a
wrench.
8. Remove the drive chain from the driven
sprocket by pushing the rear wheel
forward.
Removing Wheels
u
Axle washer
Rear axle nut
Brake
rod
Brake
stopper
arm
Cotter
pin
continued 81