Honda AFP125CRF 2018 Owner's Manual page 83

5. Remove the rear axle shaft, side collars
and rear wheel.
Support the brake caliper assembly so
u
that it doesn't hang from the brake
hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on the
u
disc or pad surfaces.
Do not push the brake pedal while the
u
brake caliper is removed.
Installation
1. To install the rear wheel, reverse the
removal procedure.
Take care to prevent the brake caliper
u
from scratching the wheel during
installation.
Tyre Puncture
NOTICE
When installing a wheel or caliper into original position,
carefully fit the brake disc between the pads to avoid
scratching them.
2. Make sure that the slot on the brake caliper
bracket is positioned in the lug on the
swingarm.
Swingarm
Slot
Removing Wheels
u
Brake caliper
bracket
Lug
continued 79