Honda AFRICA TWIN Software Update Instructions

Hide thumbs Also See for AFRICA TWIN:

Download this manual

AFRICA TWIN SOFTWARE UPDATE

FEBRUARY 2021 UPDATE—PC INSTRUCTIONS

WHAT YOU'LL NEED:

•

A USB 2.0 or higher flash drive with at least 512 MB capacity.

•

A computer with a high-speed Internet connection.

•

At least 15 minutes of time.

FORMAT THE DRIVE:

STEP ONE

Insert the USB drive into an available USB port on your computer.

STEP TWO

On your computer, locate the "Removable Disc" for the flash drive.

STEP THREE

Right-click and then select "Format" from the sub-menu.

STEP FOUR

Select "FAT32" from the file system.

STEP FIVE

Click "Start", then click "OK" regarding delete contents prompt.

Note: this step will erase all existing content from the drive.

STEP SIX

Click "OK" after "Format Complete" message appears.

DOWNLOAD THE SOFTWARE:

STEP ONE

Download the software to your computer.

STEP TWO

Save the file (CRF1100_v3.10.update) to your computer. Do not change the file name.

STEP THREE

Copy the file (CRF1100_v3.10.update) onto your USB drive, without changing the file name.

STEP FOUR

Once the download is complete, remove the USB drive from your computer.

Page 1 AFRICA TWIN SOFTWARE UPDATE FEBRUARY 2021 UPDATE—PC INSTRUCTIONS WHAT YOU’LL NEED: • A USB 2.0 or higher flash drive with at least 512 MB capacity. • A computer with a high-speed Internet connection. • At least 15 minutes of time.
Page 2 VERSION”. Once on this screen, then connect the USB drive containing the downloaded file to your motorcycle. The Africa Twin’s USB port is on the fairing, near where the right front turn blinker stalk attaches to the dash. The update should automatically start within twenty seconds after you insert the USB drive.
Page 3 REFERENCE 1. Connect USB Drive USB PORT LOCATION The Africa Twin’s USB port is on the fairing, near where the right front turn blinker stalk attaches to the dash. The USB connector space is narrow; use a small-size USB drive or small-size USB extension cable.