Honda AFP125CRF 2018 Owner's Manual page 81

Installation
1. Attach the side collar and speedometer
gearbox to the wheel.
2. Position the wheel between the fork legs
and insert the front axle shaft from the
right side, through the right fork leg and
wheel hub.
NOTICE
When installing a wheel or caliper into original position,
carefully fit the brake disc between the pads to avoid
scratching them.
3. Make sure that the lug on the left fork leg
is located in the slot of the speedometer
gearbox.
4. Tighten the axle nut.
Torque: 59 N·m (6.0 kgf·m, 44 lbf·ft)
Tyre Puncture
5. After installing the wheel, apply the brake
lever several times, then check if the wheel
rotates freely. Recheck the wheel if the
brake drags or if the wheel does not
rotate freely.
6. Install the speedometer cable securely.
Lug
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Removing Wheels
u
Speedometer
gearbox
Slot
77