Table of Contents
Advertisement
4. Select the Network menu and press
5. Select Network Settings and press
6. Select Priority Control Interface and press
7. Choose one of the following options:
• If you are casting images over a wired LAN, select Wired LAN.
• If you are casting images wirelessly directly or via a wireless network router, select Wireless LAN.
8. Set the Simple AP setting to On.
9. Select Network Projection and press
10. Set the Screen Mirroring setting to On.
11. Select these settings as necessary:
• Interrupt Connection lets you connect another mobile device while projecting using Screen
Mirroring or to exclusively connect to one device. If you want to use two Screen Mirroring sources,
turn this setting off.
Enter.
Enter.
Enter.
Enter.
86
Advertisement
Table of Contents
