Table of Contents
Advertisement
9. Select the Blend Range setting and use the arrow buttons to select the width of the blended area so
that the displayed guides are at the edges of the overlapping area between the two images.
Note: If you created a unified image area using the Edge Blending feature, set the Blend Range
setting to 600. Depending on your installation environment, you can also set the Blend Range
setting to 600 or less but black bands may appear on the side of the projected screen.
10. Press Esc to go back to the previous screen.
11. Select the Blend Curve setting and select a gradient for the shaded area on the projectors.
12. When the edges are blended, turn off the Line Guide and Pattern Guide settings on each projector
to check the final settings.
13. When you are finished, press the Menu button.
If the blended area does not overlap exactly, correct the shape of the blended area using Point
Correction.
Parent topic:
Matching the Image Colors
You can match the display color of multiple projectors that will project next to one another (BrightLink
1485Fi+). Turn on all the projectors so you can properly adjust the color of the combined screen.
1. Press the Menu button.
Using Multiple Projectors (DuoLink)
171
Advertisement
Table of Contents
