Table of Contents
Advertisement
Setting
Auto Power On
Power On Trigger
Sleep Mode
Sleep Mode Timer
A/V Mute Timer
Options
HDMI1
Computer1
USB Display
Off
Plug-in Detection
Signal Detection
On
Off
1 to 30 minutes
On
Off
290
Description
Selects whether to automatically
turn on the projector when you
connect an input signal to a
specific input source
If you select HDMI1, set the
method for automatically turning
on the projector in the Power On
Trigger setting.
Sets the way the projector turns
on when Auto Power On is set to
HDMI1.
Plug-in Detection: automatically
turns the projector on when it
detects a connected device is
turned on
Signal Detection: automatically
turns the projector on when an
HDMI signal is detected
Note: When Signal Detection is
selected, the power used in
standby mode increases.
Automatically turns off the
projector after an interval of
inactivity
Sets the time before the projector
automatically turns off (Sleep
Mode must be turned on)
Automatically turns off the
projector after 30 minutes of
inactivity
Advertisement
Table of Contents
