Table of Contents
Advertisement
4. Turn on the Edge Blending, Line Guide, and Pattern Guide settings.
Note: Select a different Guide Color setting for each projector so that you can see the blended area
clearly.
5. Select the edge you want to blend on each projector and press
left, select the Right Edge and for the projector on the right, select Left Edge.
You see a screen like this:
6. Select the Blending setting and select On.
7. Press Esc to return to the previous screen.
8. Select the Blend Start Position setting and adjust the point where edge blending begins.
Note: If you created a 3:1 unified image area using the Edge Blending feature, set the Blend Start
Position setting to 600 (BrightLink 1485Fi+).
Enter. For the projector on the
170
Advertisement
Table of Contents
