Table of Contents
Advertisement
3. To increase either the whiteboard or the projected image, drag the white part of the center divider to
the appropriate side.
Note: To enlarge either side to fit the entire screen, drag the white part of the center divider fully to
the desired edge of the screen.
4. To swap the projected image and whiteboard from left to right, select the
center divider.
You cannot perform the following operations during split screen projection:
• E-Zoom
• Switching aspect mode
Parent topic:
Sharing the Projected Screen
Follow the instructions in these sections to share the projected screen with other compatible projectors.
The screen sharing function is limited by the following:
• You can share the screen with projectors that support the screen sharing feature.
• If a firmware version amongst the projectors sharing the screen is not the same, you may need to
update the projector's firmware to share your screen.
• You cannot share images or content that are protected by HDCP.
• You cannot change the projector's Network settings while screen sharing.
Starting a Shared Screen Session
Parent topic:
Starting a Shared Screen Session
You can share the projector's screen with up to 4 compatible projectors on the same network. Users can
interact with the shared screen from the connected projectors.
To use the Screen Sharing feature, the distributing and receiving projectors must be connected to the
same network and have the Screen Sharing setting enabled in the projector's Network menu. Other
requirements include the following:
• On the distributing projector: if you want to skip authentication of keywords for other projectors to
speed up connection, set the Connection Mode setting to Keyword Off in the projector's Network
menu.
Using the Interactive Features
Using the Interactive Features
267
at the bottom of the
Advertisement
Table of Contents
