Table of Contents
Advertisement
8. When you are finished, press Esc.
Note: To save the current image shape, select Memory > Save Memory. You can save up to three
image shapes in the projector's memory.
Parent topic:
Related references
The Whiteboard Toolbar
Correcting Image Shape with Point Correction
You can use the projector's Point Correction feature to fine-tune the image shape using points on a grid.
This is useful for adjusting overlapping areas in multiple projected images that do not line up correctly.
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select Installation > Geometry Correction > Point Correction.
Note: If you see a confirmation message, select Yes and press
4. Select the Point Correction setting again and press
5. Select the number of grid lines to display and press
You see a grid on the projected image.
Note: If you need to change the color of the grid lines, press Esc, select the Pattern Color setting,
and select a suitable color.
Image Shape
Enter.
Enter.
Enter.
120
Advertisement
Table of Contents
