Table of Contents
Advertisement
Optical cable
Connect the optical cable to the CD player/tuner and the sound
processor.
© Remove a dust-protection cap in the terminal.
CD player/tuner
Sound processor
-
DIGITAL
DIGITAL
CD
□
CO
9DDD
T
Optical cable
-
1
- -
)
(included)
Amplifier
Cassette deck
@ Connect an optical cable.
Please keep the dust-protection cap.
CAUTION
When using the optical cable, please keep the following points in
mind:
1. The maximum length of optical cable to be used with this unit is
1 m (approx. 3.3 ft.).
2. Always make sure the plug is fully inserted. If the plug is not
inserted all the way, an imperfect connection will result.
3. The optical cable must never be bent or coiled tightly. Doing so
will permanently damage the optical fiber in the cable and,
therefore, prevent proper data transmission. If the cable must be
coiled (for storage, etc,), the diameter of the loop should be at
least 15 cm (approx. 6 inches).
4. Handle the optical cable's plug very carefully. Keep the plug free
from dust or damage. Dust can be removed by wiping the plug
with a soft cloth. Do not use any cleaners or solvents to clean
the plug.
Advertisement
Table of Contents
