Table of Contents
Advertisement
Front Panel Controls and Functions
(continued)
® Loudness button (S. LOUDNESS)
This button Is used to boost the dynamic low frequency ranges
in a low volume level.
®
Input select buttons
(DAT, CD, VDP, VCR, TAPE, TUNER, PHONO)
These buttons are used to select the sound source to be
heard.
® Volume level control (VOLUME)
This control is used to adjust the volume level.
Note thatdB" is the lowest volume setting and "0 dB" is the
highest level setting.
<§) Power "STANDBY 6/ON" switch
(POWER STANDBY 6/ON)
This switch switches ON and OFF the secondary circuit power
only. The unit is in the "standby" condition when this switch is
set to the STANDBY (b position. Regardless of the switch
setting, the primary circuit is aiways "live" as long as the
power cord is connected to an electrical outlet.
® Headphones jack (PHONES)
(S) Clock set button (CLOCK SET)
This button is used to set the present time.
@
Timer select buttons (▼ SELECT A)
These buttons are used when setting the time, making the
timer setting, selecting the type of timer operation, etc.
(g) Timer set button (TIMER SET)
This button is used to enable the timer set mode and the
current selection, selected by the timer select buttons.
® Timer cancel button (CANCEL)
This button is used to cancel the timer setting.
® Timer standby button (STANDBY)
This button is used to cancel the timer setting temporarily.
® Timer setting confirmation button (RECALL)
This button is used to confirm the timer settings.
@
Microphone volume control (MIC VOL.)
This control is used to adjust the microphone volume level.
® Microphone lack (MIC)
® Balance adjustment buttons (BALANCE)
These buttons are used to adjust the volume balance.
Advertisement
Table of Contents
