Technics SC-CH700 Operating Instructions Manual page 43

Hide thumbs Also See for SC-CH700:
Table of Contents

Advertisement

Dolby NR system
This is a system intended to reduce hiss noise in the high frequency
range. It raises the level of the high frequency components during
recording, and lowers it by the same amount during playback.
B type:
Noise is reduced to about '/j. Use this type when playing
a tape in the Dolby NR mode.
C type:
Noise is reduced to about Vio. Use this type when record¬
ing and playing back a high quality, high dynamic range
source such as a compact disc or FM broadcast.
Dolby noise reduction and HX Pro headroom extension manu¬
factured under license from Dolby Laboratories Licensing Cor¬
poration. HX Pro originated by Bang & Olufsen.
"DOLBY", the double-D symbol □□ and "HX PRO" are trademarks
of Dolby Laboratories Licensing Corporation.
■ To briefly interrupt recording
This function is also available from the remote control. Follow the
procedure described below.
Press the record/record standby button.
[
REC PAUSE
]
The cassette deck will go into the recording standby state.
To resume recording, press the play button corresponding to the
direction in which recording is taking place.
■ To stop recording
This function can also be performed from the remote control. Follow
the procedures described below.
Press the stop button.
Concerning the leader tape
21
3
Magnetic tape (where recordings are made)
Leader tapes (no recordings can be made) -
43

Advertisement

Table of Contents
loading

Table of Contents