Setting The Search Frequency Step - Uniden SC230 Owner's Manual

SC230 Paper OM.fm Page 79 Wednesday, October 6, 2004 10:51 AM
The scanner resumes immediately when the
Off
transmission ends.
1-5 sec The scanner waits the set amount of time after
the transmission ends before resuming.
Note: The default setting is 2 seconds.

Setting the Search Frequency Step

Srch/CloCall Opt
Menu
E
Set Step
This setting selects the frequency step used for setting
the channels. Select your setting, then press E.
Auto The step is based on the band (see the table at the
front of the manual)
5.0 kHz, 6.25 kHz, 7.5 kHz, 10.0 kHz, 12.5 kHz, 15.0 kHz,
20.0 kHz, 25.0 kHz, 50.0 kHz, 100.0 kHz
uses the selected step.
Note: The scanner defaults to Auto.
Search and Close Call Options
E
The scanner
79