Uniden SC230 Owner's Manual page 86

SC230 Paper OM.fm Page 86 Wednesday, October 6, 2004 10:51 AM
Scan won't You must press
start. Scan to scan.
The squelch
might need to be
adjusted.
One or more
channels might be
locked out.
The antenna
might need to be
adjusted.
Weather The squelch
scan might need to be
doesn't adjusted.
work.
The antenna
might need to be
adjusted.
There might not
be a NOAA
weather
broadcast in your
area.
If you still cannot get satisfactory results while using your
scanner or if you want additional information, please call
or write the Uniden Parts and Service Division.
The address and phone number are listed in the Warranty
at the end of this manual. If you would like immediate
assistance, please call Customer Service at
(800) 297-1023.
If you have Internet access, you can visit
http://www.uniden.com for additional information.
Press Scan.
Adjust the squelch
threshold. See "Turning
On the Scanner and
Setting the Squelch" on
Page 34.
Make sure the channels
you want to scan are
not locked out.
Check the antenna
connection.
Adjust the squelch
threshold. See "Turning
On the Scanner and
Setting the Squelch" on
Page 34.
Check the antenna
connection.
Move to an area with a
NOAA weather
broadcast.
Troubleshooting
86