Scanning The Alert Monitor Frequency Banks; Selecting The State; Selecting A Frequency Bank - Uniden BCT7 Operating Manual

Scanning the Alert Monitor Frequency Banks

The Alert Monitor works with the Highway Patrol, Police, and Department of Transportation (DOT) frequency banks.
Frequencies are preprogrammed at the factory on a state-by-state basis.

Selecting the State

Press S to select the state you
are operating in. Press and hold
S to scroll rapidly.

Selecting a Frequency Bank

Press G to monitor Highway
Patrol frequencies.
HIGHWAY
HIGHWAY appears in the display
and scanning begins two seconds
later.
To step forward through the states
(A - W), press S and, within two
<
seconds, press repeatedly. To
step backward through the states
S
(W -A), press and, within
>
two seconds, press
P
Press to monitor Police
frequencies.
POLICE flashes in the display and
scanning begins two seconds later.
HIGHWAY flashes, because those
frequencies are scanned, too.
To scroll rapidly, press
>
hold or
repeatedly.
P
Press
frequencies.
DOT flashes in the display and
scanning begins two seconds later.
HIGHWAY
frequencies are scanned, too.
S
and
<
.
again to monitor DOT
flashes because those
9