Search - Uniden BCT7 Operating Manual

Highway communications system & scanning radio
Table of Contents

Advertisement

Search

You can use the SEARCH feature to find active frequencies in your area. Many frequencies have already have been
pre-programmed into one of the SCAN MODES (Highway, Police, DOT, etc.).
You can search for any frequencies between 29.000 and 956.000 MHz, as well as CB channels 1 through 40, as long as
they are within the 12 Bands covered by the BCT7. See the table on page 5, or the Specifications at the back of this
Guide.
B
1. Press
to enter
Band Search Mode.
OR
B
Press
repeatedly to select
another band.
Note: AIR appears when
searching the Aircraft Band.
18
2. Two seconds later, the
begins searching that band.
L
During Search, press
lockout undesired frequencies that
the scanner stops on.
<
BCT7
Press
direction (up or down) of the
frequency search.
to
>
or
to change the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents