Programming Frequencies - Uniden BCT7 Operating Manual

Programming Frequencies

B
1. Press to find a frequency
band you wish to search.
4. Press Q .
7.Press Q again to enter the
frequency.
If you find a frequency you would like to program while in a general search of a band, press
frequency, then follow programming steps 3 through 8.
22
2. When the BCT7 begins
H
searching, press .
5. Select the bank where you
want to program the frequency
(Highway, Police, DOT, News, Fire
or Private).
The unprogrammed channel
number and 000.0000 flash on and
off over the frequency you chose.
H
8. Press to begin
scanning
< >
3. Press or
desired frequency.
<
6. Press or
move to the channel where
you wish to program the
frequency (you may skip this
step if you wish to simply
place the frequency in the
next available channel).
OR B
9. Press the
selecting another frequency
to program.
H
to stop the search on the
to find the
>
keys to
key to begin