Table of Contents
Advertisement
Canon
7.24 Plockmatic BLM50/BLM35 Professional Booklet Maker
Item
Required Equipment
Standard Paper sizes
Supported Paper sizes
Supported Paper Weight
Input/Output sheets
(Stapled)
Input/Output sheets
(Non-stapled)
Belt Stacker Capacity
Maximum Speed
Noise Level
Off-line use
Power source
21
Power consumption
Dimensions (H x W x D)
Weight
21
Canon USA strongly suggests that the power receptacle for the BLM 50/35 Professional Booklet Maker is connected
to a separate breaker from the power receptacle for the Rotator Module. This is necessary to maintain adequate current
for the Professional Booklet-Maker and each of the modules.
Revision 4
High Capacity Stacker-J1
OR
DFD Adapter and Finisher Bridge Unit
Finisher Bridge Height Kit 1002-A1
8.5 x 11", 8.5" x 14", 9" x 12", 11" x 17", 12" x 18"
8.1" x 10.8" (206 mm x 275 mm) to 12.6" x 18.1" (320 mm x 459 mm)
16 lb bond – 115 lb cover (64 g/m
28 lb bond - 115 lb cover (105 g/m
2 – 50 sheets or 2 – 35 sheets (20 lb bond (80 g/m
1 – 2 sheets (folded)
2 sheets: 200 sets
8 sheets: 70 sets
15 sheets: 35 sets
20 sheets: 25 sets
30 sheets: 15 sets
35 sheets: 15 sets
40 sheets: 10 sets
45 sheets: 10 sets
50 sheets: 10 sets
Based on 20 lb bond (80 g/m
Up to 1,800 booklets/hour
Up to 62dB
Yes
100-230 V ±10 % 50-60 Hz
250 W or less during continuous operation
Approximately 41 3/8" x 57 7/8" x 28 3/4"
(1,050 mm x 1,470 mm x 730 mm)
Approximately 341 lb (155 kg)
imagePRESS V1000 Customer Expectations Document
imagePRESS V1000 Customer Expectations Document
Specification
2
- 300 g/m
2
) Uncoated
2
– 300 g/m
2
) Coated
2
)
2
))
Page 85
Advertisement
Table of Contents
