Recommended Floor Space Requirements - Canon imagePRESS V1000 Customer Expectation Document

Canon

4.4 Recommended Floor Space Requirements

For the large configuration of the imagePRESS V1000, it is recommended that there
be at least 39.3.1' (W) x 9' (D) of level floor space.
IMPORTANT
• The imagePRESS V1000 was created to be modular in design. Floor space,
budget, monthly copy/print volume, and applications will determine which
configuration works best.
• Some type of finishing option (Saddle Finisher, Finisher, or High Capacity
Stacker) is required.
• The optional SDD Square Fold Booklet Maker with Two-Knife Trimmer is not
shown in the configuration diagrams above. If the SDD Square Fold Booklet
Maker with Two-Knife Trimmer is attached to the machine, make sure that there
is approximately 41.2" (1,046 mm) of space added to the installation space and
floor design.
• The SDD BLM300C Professional Booklet Maker requires the High Capacity
Stacker-J1, has several options that enhance the booklet maker's finishing
system, such as a 2-knife trimmer and square fold device, and the BLM300C
finishing system must be the final in-line accessory attached to the machine.
• The Plockmatic BLM 50/35 Professional Booklet Maker requires the High
Capacity Stacker-J1.
Revision 4 imagePRESS V1000 Customer Expectations Document
imagePRESS V1000 Customer Expectations Document
39.3' (12 m)
Page 50