Installing The Software; Installing Photodeluxe On Your Pc - UMAX Technologies Astra 2000U Owner's Manual

Installing the Software

Now that you have made the physical connection between the Astra
2000U/P scanner and your computer, the next step is to install the
software that allows the two devices to communicate with one
another.
Because the Macintosh and PC installation procedures are different
for PhotoDeluxe, the installation instructions for that software is
divided into PC and Macintosh software installation sections.

Installing PhotoDeluxe on Your PC

NOTE: PhotoDeluxe is compatible with Windows 98, 95 and
higher. Use the following steps to install your scanning software
rather than using the add/remove programs to install the software.
1.
Insert the CD-ROM labeled "PhotoDeluxe" into your
computer's CD-ROM drive. Your computer should
automatically read the disc and display a series of screens
regarding product licensing. Follow the onscreen instructions.
NOTE: If your computer does not automatically read the CD-
ROM after insertion, click on the "Start bar" and select
"Run..." A dialog box appears. Type "d:\autoplay.exe" in the
open text box. If your CD-ROM is designated with another
letter, substitute the appropriate letter for the drive.
2.
A Licensing Agreement window appears. Enter the country
where you are currently located in and click Next.
3.
Read the licensing agreement and then click Agree.
4.
A PhotoDeluxe Install window appears. Click the Install
button. Follow the onscreen instructions.
5.
When you get to the Setup Type window, choose Typical.
18