Functions; Con@Ctivity; Permanent Pan Recognition; Pan And Pan Size Recognition - Miele KMDA 7676 Operating And Installation Instructions

Table of Contents

Advertisement

Functions

Con@ctivity

The vapour extraction will switch itself
on automatically if there is an item of
cookware on the cooking zone and a
power level has been set for that zone.
The power level for vapour extraction is
set to suit the power level of the cook-
ing zone. The run-on time and level de-
pend on the power level of the vapour
extraction.
You can deactivate Con@ctivity tempor-
arily or permanently.

Permanent pan recognition

When you place cookware on a cooking
zone, the numerical display for the
cooking zone is activated automatically.

Pan and pan size recognition

The cookware and its size are detected
within a cooking zone. The release of
energy is adapted to the size of the pan.

PowerFlex XL cooking area

A PowerFlex XL cooking area joins to-
gether 2 PowerFlex XL cooking zones,
making it possible to use larger cook-
ware.
The PowerFlex XL cooking zones com-
bine automatically to form a PowerFlex
XL cooking area when you place suffi-
ciently large items of cookware on them
(see "Familiarisation – Cooking zone
data"). The PowerFlex XL cooking
zones can also be combined manually.

Booster

When the Booster function is activated,
the power is boosted so that large
quantities can be heated up quickly,
e.g. when boiling water for cooking
pasta.
Stop&Go
When Stop&Go is activated, all power
levels are reduced to 1.
When the function is deactivated, the
appliance switches back to the power
level that was set last.
Tip: Use this function if there is a
danger of food boiling over.

Additional power levels

You can activate additional levels
between the existing power levels.
These intermediate levels allow you to
adjust the power more precisely for the
cookware.

Auto heat-up

When auto heat-up has been activated,
the cooking zone switches on automat-
ically at the highest setting and then
switches to the power level (continued
cooking setting) which you have previ-
ously selected.

Timer

The timer can be used for the following
two functions:
- For setting the minute minder
- For automatically switching a cooking
zone off
You can use the functions simultan-
eously.
Familiarisation
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kmda 7676 fl-aKmda 7676 fl-u

Table of Contents