Table of Contents
Advertisement
Remove the Switch from a Four-Post Rack
Figure 31: Disconnect latch for removal
b. Disengage the retainers that are connecting the mounting brackets with the
sliding rails on both sides.
c. Carefully slide the device out of the slider assembly and place it on a flat surface.
You can leave the slider assemblies in place. If you want to remove them,
continue with the next step.
d. On one of the slider assemblies, push the rear clamp until it separates from the
rear rack post.
74
Extreme 7720 Hardware Installation Guide
Remove and Replace Components
Advertisement
Table of Contents
Related Manuals for Extreme Networks 7720
Related Products for Extreme Networks 7720
- Extreme Networks Extreme 7520 Series
- Extreme Networks Extreme 7520-48Y-8C
- Extreme Networks Extreme 7520-48Y-8C-AC-F
- Extreme Networks Extreme 7520-48Y-8C-AC-R
- Extreme Networks Extreme 7520-48XT-6C
- Extreme Networks Extreme 7520-48XT-6C-AC-F
- Extreme Networks Extreme 7520-48XT-6C-AC-R
- Extreme Networks ExtremeWare 7.7
- Extreme Networks ExtremeWare 7.2e
- Extreme Networks ExtremeWare Version 7.8
- Extreme Networks EPICenter 7.1 Job Scheduler
- Extreme Networks ExtremeWare 7.5
- Extreme Networks ExtremeWare 7.3.0
- Extreme Networks ExtremeWare 7.0.0
- Extreme Networks Virtual Services Platform 7200 Series
- Extreme Networks VSP 7254XSQ