Table of Contents
Advertisement
Four-Post Rack Mount
Figure 18: Front Installation: Attaching the Inner Rail
•
If using the 1U or 2U short rack ears, attach one to the side of the device using the
#6-32 screws, so that the rack ear is flush with either the front or the rear panel of
the device.
Figure 19: Front Installation: Attaching a Rack Ear
56
Extreme 7720 Hardware Installation Guide
Install the Switch
Advertisement
Table of Contents
Related Manuals for Extreme Networks 7720
Related Products for Extreme Networks 7720
- Extreme Networks Extreme 7520 Series
- Extreme Networks Extreme 7520-48Y-8C
- Extreme Networks Extreme 7520-48Y-8C-AC-F
- Extreme Networks Extreme 7520-48Y-8C-AC-R
- Extreme Networks Extreme 7520-48XT-6C
- Extreme Networks Extreme 7520-48XT-6C-AC-F
- Extreme Networks Extreme 7520-48XT-6C-AC-R
- Extreme Networks ExtremeWare 7.7
- Extreme Networks ExtremeWare 7.2e
- Extreme Networks ExtremeWare Version 7.8
- Extreme Networks EPICenter 7.1 Job Scheduler
- Extreme Networks ExtremeWare 7.5
- Extreme Networks ExtremeWare 7.3.0
- Extreme Networks ExtremeWare 7.0.0
- Extreme Networks Virtual Services Platform 7200 Series
- Extreme Networks VSP 7254XSQ