Removal Of Propeller Fan / Fan Motor - Daikin Si12-992 Service Manual

Removal of Propeller Fan / Fan Motor

11.Removal of Propeller Fan / Fan Motor
Procedure
Step
1. Removal of the propeller
fan
1 Unscrew the washer
fitted nut (M6) to
remove the propeller
fan.
2. Removal of the fan motor
Disconnect the
1
connector [S70] for the
fan motor from the
PCB.
34
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Propeller fan
[S70]
Wrench size: 10mm
(R9977)
(R9978)
When reassembling, align
the mark of the outdoor
fan with the D-cut section of
the motor shaft.
(R7620)
(R9979)
Si12-992
Points
Removal Procedure