Adjusting The Picture; Operating The Camera; A Remote Site - Sony RSE-500 Operating Instructions Manual

HHAHHHHDIIUUG 1
DOIN na e o HAND | RITA AAA
DULL
£ saideyo
Adjusting the Picture
You can adjust a picture (zoom, pan, tilt, focus and
iris) or change the picture quality.
Operating the Camera
You can operate the camera with the camera
controller.
1 To operate a camera at the local site. select
LOCAL CAM CTR from the main menu.
To operate a camera at a remote site, select
REMOTE CAM CTR from the main menu.
The following screen appears. (The illustration
below is for selecting LOCAL CAM CTR.)
— LOCAL CAMERA CONTROL—
<+> ZOOM [4-5
<*> PAN <>
<t> TILT <p>
<+> FOCUS <->
<+> IRIS <->
<EXIT>
2 Select an item to set using €, 4. œ, or $. Press
ENTER repeatedly to adjust the item.
The picture on the monitor is adjusted.
3 Move the cursor to «EXIT» using *. then press
ENTER.
The main menu appears.
To adjust the zoom
Select <+> or «—» next to ZOOM.
To adjust the angle
Select <> or «* next to PAN or select <#> or <#>
next to TILT for the desired angle.
To adjust the focus
Select «4» or <-> next to FOCUS.
To adjust the iris
Select <+> or <-> next to IRIS.
Picture Sent from a Remote Site
You can change the quality of the picture sent from a
remote site.
1 Select REMOTE PICTURE from the main menu.
The current picture quality setting is displayed in
the lower-left corner of the main menu.
MENU LOCAL REMOTE
OFF ALARM ALARM
CAM SEL CAM SEL
DIAL CAM CTR CAM CTR
LIST. P 1/0 P 1/0
KEY.. INFO... PAUSE
DISC. HEADSET LINE
MIC MIC
SETTING pnr PICTURE
BUSY
Current setting FAST
2 Press ENTER.
Each time you press ENTER, the picture quality
setting is changed as follows.
= NORM —= FAST — FINE J
FINE: Gives picture quality preference than
picture motion.
NORM: Middle setting between FINE and
FAST.
FAST: Gives picture motion preference than
picture quality.