Selecting The Line (Headset) Volume 2-8 (En); Selecting The Microphone Input Level2-8 (En); Selecting The Picture Quality - Sony RSE-500 Operating Instructions Manual

zm
Basic Setting
7 Move the cursor to <OK> using ¥, then press
ENTER.
The audio level and microphone input level are set
and the SETTING menu appears.
If you set a low level in the HIGH position and a high
level in the LOW position, low level is output (or
input) regardless of selecting HIGH and high level 1s
output (or input) regardless of selecting LOW.
Selecting the Line (Headset)
Volume
1 Select 13. AUDIO-HEADSET from the SETTING
menu.
The following screen appears.
AUDIO-HEADSET
HIGH (LOW) OFF
<CANCEL> «OK»
2 Select HIGH, LOW or OFF using € or ».
The selected setting becomes highlighted.
HIGH: The volume is set to the HIGH position
level set in 12. AUDIO MIC LEVEL.
LOW: The volume is set to the LOW position
level set in 12. AUDIO MIC LEVEL.
OFF: Sound is muted.
3 Move the cursor to «OK» using *. then press
ENTER.
The setting is registered and the SETTING menu
appears.
Selecting the Microphone Input
Level
1 Select 14. MIC from the SETTING menu.
The following screen appears.
MIC
HIGH (LOW OFF
| <CANCEL> <OK>
2 Select HIGH. LOW or OFF using € or œ.
The selected setting becomes highlighted.
HIGH: The input level is set to the HIGH
position level set in 12. AUDIO MIC LEVEL.
LOW: The input level is set to the LOW position
level set in 12. AUDIO MIC LEVEL.
OFF: No sound is input.
3 Move the cursor to «OK» using ¥, then press
ENTER.
The setting is registered and the SETTING menu
appears.
Selecting the Picture Quality
1 Select 17. PICTURE MODE from the SETTING
menu.
The following screen appears.
PICTURE MODE
FINE [NORMAL] FAST
<CANCEL> <OK>
2 Select the picture quality using € or *.
The selected setting becomes highlighted.
FINE: Gives picture quality preference than
picture motion.
NORMAL: Middle setting between FINE and
FAST.
FAST: Gives picture motion preference than
picture quality.
3 Move the cursor to «OK» using *, then press
ENTER.
The picture quality is set and the SETTING menu
appears.