Connections For The Terminal Site - Sony RSE-500 Operating Instructions Manual

'Connections for the Terminal Site
The basic connections for the terminal site are shown
below. (The illustration below 15 RSE-500.)
—
Camera8 (with
power zoom lens)
Camera2 Pan-tilter
Camera1
AME
556 heee.
E AC power cord
to Monitor V.35 adaptor
coe connector cable = to AC outlet
ine
to channel B
Microphone")
oT
to channel A
| Camera switcher
( Camera9
Camera10
Speaker
Camera11
mp
to a digital
line
_1) If you connect the microphone which has an XLR connector to the MIC IN jack. use the following audio conversion cable
(not supplied).
* When the microphone has a female connector, use EC-0. 40M (17 Ya inches (45 cm), 4- pin — XLR (male).
* When the microphone has a male connector, use EC-0.4CF (17 Ya inches (45 cm). 4 pine— XL R (female)).
DULL
| 191deu5
NIT