Airlink101 Host RJ-11 User Manual page 5

FIGURE 2. Host RJ-11 Gateway with an AirLink Raven-E and a Modem Router
Host RJ-11 IP Gateway Features
• One RJ-11 phone port
The phone port is a phone line designed to function just like standard wall-jack analog phone
line. It is designed primarily to connect dial-up devices, with internal modems, to the RJ-11 IP
Gateway, which then routes data from the devices over the network. The RJ-11 IP Gateway and
them to an internal modem attached to the phone port, or generating calls from an internal
modem to an attached device.
t
Caution: The Host RJ-11 IP Gateway's RJ-11 phone port should never be con¬
nected into the Public Switched Telephone Network (PSTN). This device is
designed to emulate the PSTN for other devices. The Host RJ-11 IP Gateway may
sustain damage not covered by warranty if it is connected to the Public Switched
Telephone Network.
• One RJ-45 auto-sensing lObase-T Ethernet port
The Ethernet port is designed to be connected to either an AirLink modem with an Ethernet port
such as the Raven-E or Raven X or any Ethernet-based network. With the modem connected to
the cellular network, the communication from the device connected to the RJ-11 port can be
The Host RJ-11 IP Gateway uses a AC power adapter with an optional DC adapter available.
• Status LEDs
The Host RJ-11 IP Gateway status
of the ports.
5 LEDs give cle