Airlink101 Host RJ-11 User Manual page 11

Installation
A
FIGURE 6. Port Utility
^ Configure a temporary IP address for configuring the Host RJ-11 IP Gateway.
A. Double-click on the [Click to Assign] for the discovered device (if an IP addess is listed in that
column, double-click on the IP address if you need to change it).
B. Type in an IP address. It's recomended that you use 192.168.1.3,
C. Press Enter to save the address.
optional If the Host RJ-11 IP Gateway is not displayed in step 2, you will need to manually add the device.
A. Click on Add Unlisted Port Server.
B. Click on Assign IP Address.
C. Enter the MAC address found on a sticker beside the Ethernet port on the Ethernet Address
D. Type in the desired IP Address as noted in step 3 above.
E. Click Assign IP Address.
Host RJ-11 IP Gateway User Guide,