Airlink101 Host RJ-11 User Manual page 23

With Modem Signal Loopbacks, the Host RJ-11 IP Gateway eliminates the use of specialized
types to other signal types internally.
NativeCOM, (or any RFC-2217 Telnet client with COM-PORT-OPTION support) overrides the
Port Services
By default, the RJ-11 port is configured to accept incoming TCP connections from TCP/telnet cli¬
ents with outgoing service based on phone numbers dialed by the attached device (Modem Ser-
servers. In addition, the modem emulation feature may be enabled to allow a serial port to mimic a
• When using the modem service on the port, the phone number will be translated to a host/port
• When using outgoing connections on the port, the settings configured on the Serial Settings
page will be applied to the port, and a TCP connection will be established to the remote host.
• Once connected, data received on the port is sent to the remote server over the network connec¬
tion and data received on the network connection is sent out the port.
FIGURE 5. Host RJ-11 IP Gateway:
Port Service Settings for Phone
Service Type
0 No outlining service
ssad by incoming network connections.
Outgoing network connections are established baaed on phone numbers dialed by the attached device.
Incoming netovork connections "ring" the attached device.
^ Outgoing network connections are established based on the presence of modem signals.
Q Outgoing Telnet Connection
Outgoing telnet connections are established based on the presence of modem signals.
Modem Service Options
Source TCP port tor ou
toran»
to which you will he connecting,
| Save Changes j
j proto cols for each remote peer
No Outgoing Service: Disables outgoing port services on the specified port. Incoming connec-
Host RJ-11 IP Gateway User Guide,