Airlink101 Host RJ-11 User Manual page 10

Installation
A
6
.
m
Configuring the Intial IP Address for the Host RJ-11 IP
Gateway without a Raven-E
The configuration interface for the Host RJ-11 IP Gateway is web-based, to be
interface you will need to connect the Host RJ-11 IP Gateway to a computer us
If you are using a Raven-E with the Host RJ-11 IP Gateway, you do
also, do not need to use this utility.
late way, you,
j Connect your Host RJ-11 IP Gateway directly to the Ethernet port on your computer and to
A • power.
^ Start the Port Utility.
* Start > All Programs > Systech Port Server Utilities
The Port Utility should automatically detect the Host RJ-11 IP Gateway. It may take a short while
for the device to be displayed.
Host RJ-11 IP Gateway User Guide,